Installation by trunk harness (9-5 Estate, 1999-2005)

The left trunk cover must be remove.
3 torx screws must be removed
You need a 27 torx
The side upholstery screws must be unscrewed with an 8 wrench
Behind the upholstery you will find the thick cable bundle
The connectors are behind the left rear wheel
The protector plug must be removed from the two wire connectors
The BT-Changer is ready for installation.
Fixing the ground point is very important
Use the factory mount
Plug the two connectors together and it’s ready to use

After installation, don’t forget to configure the module via Wi-Fi!

FIRST SETUP
Shopping Basket